Segment RINGX, SHORT, 3 pcs
RINGX-SEG-3xOR
Afterburner system with adjustable size!
Due to the segment-based design, this system can be customized to fit various diameters, making it ideal for larger setups. Each segment forms part of a circular arc and can be configured differently as needed.
The dimensions are largely variable depending on the number of segments and can also be arranged in a dual-row setup. You’ll find a template with possible configurations HERE.
Here are some possible dimensions for the reference:
INLINE (single row):
130-140mm with 5 segments
160-170mm with 6 segments
190-200mm with 7 segments
210-220mm with 8 segments
240mm with 9 segments
260mm with 10 segments
INTERLACED (slightly overlapping):
180-190mm with 8 segments
200-210mm with 9 segments
220-240mm with 10 segments
240-260mm with 11 segments
270-290mm with 12 segments
290-310mm with 13 segments
Performance: 6 emitters with 70 lumens each
Voltage: 2S/8V
Electricity: ~0.9A per segment
Beam angle: ~100°
Cable length: 0.5m PTFE cable
2 pcs. RINGX Segment, equipped with 0.5m teflon cable and pre-configured resistor for 2S.
| Colour: Orange |
| Operating Voltage: 2S/8V |
| Cable Length: 0.5m PTFE 0,14mm² |
| Design: Round |
| Function: Afterburner |
Internal Reference:
RINGX-SEG-3xOR
Each segment is attached to a mount with two screws, but the alignment and layout need to be customized to your specific model, requiring a suitable end frame.
Please note that high-performance LEDs can become very warm, up to 70°C is completely normal. These heat sink mounted lights are suitable for continuous operation when air convection is possible. After installation, check the operating temperatures. We cannot guarantee against overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!