Skip to Content
  1. All Products
  2. Einzel LEDs
  3. Emitter Chip, 3Wx2
Default EUR pricelist

Emitter Chip, 3Wx2

https://www.unilight.at/web/image/product.template/2070/image_1920?unique=38a6efe

POINT-030x2

Emitter-LED-Chip in RED, GREEN, WHITE, WARMWHITE

High-performance LED module with 3Wx2 reference power for DIY strobe and flashing lights.  

Always consider heat development when building your own lights. These high-performance LED chips cannot be operated without cooling. Use additional heat sinks or reduce power if you want to create, for example, a position light. This can also be achieved by using the 3S resistor on a 2S battery (approx. 20-30% reduction).  

​

Performance: 3Wx2 reference power
Voltage: 8V, use an additional resistor for 12V!
Electric current: 0.25A
Beam angle: ~120°
Light intensity: ~80 Lumen RED
Light intensity: ~120 Lumen GREEN
Light intensity: ~220 Lumen WHITE
Light intensity: ~220 Lumen WARMWHITE
Dimension: D15m, LED-Chip D5x5mm
Weight: 1g (without cable)

Delivery Content:

Equipped with 0.5m connection cable and pre-configured resistor for 2S

8.25 € 8.25 EUR 8.25 €

8.25 €

Not Available For Sale

  • Colour
  • Operating Voltage
  • Cable Length
  • Design
  • Dimensions
  • Function

This combination does not exist.

Contact Us
Operating Voltage: 2S/8V or 3S/12V with additional resistor
Cable Length: 0.5m PTFE 0,14mm²
Design: Round
Dimensions: 15mm
Function: Strobe

Short URL

Warning Notice:

Please note that high-performance LEDs can become very warm, up to 70°C is completely normal. These heat sink mounted lights are suitable for continuous operation when air convection is possible. After installation, check the operating temperatures. We cannot guarantee against overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!