Skip to Content
  1. All Products
  2. All Products
  3. XLARGE ACCU-Set, up to 3m
Default EUR pricelist

XLARGE ACCU-Set, up to 3m

https://www.unilight.at/web/image/product.template/2696/image_1920?unique=2e920c3

NIGHT-XL-ACCU

uniLIGHT Night-Blades

  • Compact size with maximum performance
  • Minimal impact on flight performance
  • Innovative cable- and plug-free mounting
  • Optimized, adjustable cooling reflector
  • Reduced self-glare
  • 5 sizes for all scales
  • Specifically for wings and symmetrical for tail
  • Asymmetric design for maximum durability
  • Safety holder with position light available
  • Large systems available as both wired and autonomous battery versions

The battery-powered night-flying blades are the simplest way to illuminate large models indirectly. Based on the standard LARGE and XLARGE systems, these blades include a central battery holder on each light blade to accommodate a small, weight-optimized LiPo battery. The battery simply snaps in place and is held by mounting rings – and the system is active. The XLARGE system can be used for a single 7-8 minute flight with a fully charged battery. The delicate yet highly robust carbon fiber tube construction delivers intense light output at low weight, without significantly affecting flight characteristics.

Compared to wired systems, the light output of the lightweight battery systems is somewhat lower, but the system is immediately ready for use with no wiring or soldering required on the airframe. In the delivered condition, the tubes and plates are only pre-assembled and can still be shortened and aligned on the model. This allows for optimal lighting. Once positioned, the arms are permanently fixed with a few drops of epoxy. Asymmetric mounting is also possible (e.g., a shorter arm near the ground).

​

Composition: Fiberglass/Aluminium compound, 5mm carbon fiber (CFK) tube, pre-assembled
Voltage: 8V, 2A
Operating time: 7-8 minutes
Safety: Integrated safety position light, can be deactivated with a solder jumper to extend runtime
Light intensity: ~1200 Lumen WHITE
Dimentions: 310x85mm
Weight: 2x71g

Purpose of Use:

Indirect lighting fitting bigger models with wingspan of up to 3m

Delivery Content:

2x XLARGE Wing-Blades, 2x LIPO-330 batteries, 2x mounting plates, 2x safety light caps, 4x mounting rings

183.25 € 183.25 EUR 183.25 €

183.25 €

Not Available For Sale

  • Colour
  • Operating Voltage
  • Function

This combination does not exist.

Contact Us
Colour: White
Operating Voltage: 2S/8V
Function: Night

Internal Reference: NIGHT-XL-ACCU

Short URL

Assembly Instruction:

First, the included mounting plate can be securely glued into the wingtip, ideally using strong epoxy and pins.
No connection cables are necessary.
For the L and XL systems, the light plates must be aligned on the model during the initial installation and fixed in place with a small amount of epoxy.
The reflector surfaces should then be bent once to direct as much of the light emission as possible onto the model.
CAUTION: The reflector surfaces harden and can only be bent a few times. Secure the glued area before adjusting the surfaces by hand or with small pliers to prevent the adhesive joint from breaking.
After the flight, the Night Blades can simply be unscrewed for easy transportation. No trace of the night-flying system remains.

Warning Notice:

After installation, check the operating temperatures. We cannot guarantee against overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!