Skip to Content
  1. All Products
  2. All Products
  3. LITE connector, 6P contacts
Default EUR pricelist

LITE connector, 6P contacts

https://www.unilight.at/web/image/product.template/1274/image_1920?unique=c7f5b84

LITE-6P

The uniCONNECT connector system uses solid blade contacts and highly durable base strips. With this new design, high pin counts in a compact connector can now finally be realized – up to 28 pins. It allows for more than 3000 cycles with load capacities of up to 10A, making it optimal for use in model making.

The blade strips have the advantage that all cables can be reliably and easily soldered without the risk of melting a plastic carrier. Additionally, they include strain relief, locking mechanisms, handle and kink protection. The contacts on the blade strips are always visible, making it easy to detect any damage or contamination immediately.

The greatest advantage of the system is that it provides double redundancy for important control functions within the connector itself. Therefore, the system distinguishes between primary pins (doubled, for main functions) and secondary pins (single, for lights, landing gear, brakes, etc.), unlike traditional systems that only specify pin counts.

LITE is a simplified version of the well-known DIRECT connector system. It is ideal for applications with limited space, such as rudders or thin wings. The socket is designed with increased contact pressure and is securely bonded with a durable elastic material (silicone) to allow movement. The male connector is screwed in as usual. 

​

6 primary contacts (redundantly wired; for main functions such as servos)
3000 cycles, 10A
Strain relief, handle and bend protection
Primary contacts feature built-in redundancy within the connector.
Easily accessible contacts and solder points.
Available as a kit with all parts and screws
Dimensions: cover 28x7mm
Dimensions: socket 21x7x18mm
Weight: 10g (without cables)

Purpose of Use:

RTR
Fully assembled and soldered unit with 3m cable, directly connected 1:1. It is installed on one side, the length defined to the servo, and assembled with crimp contacts. The remaining cable is routed to the receiver side and then assembled. This completed unit is always delivered as a single piece, i.e., 1xM and 1xF

DIY
Kit for modelers with all individual parts and screws for custom-assembly. This option is naturally very cost-effective, and two pairs are always included, i.e., 2xM and 2xF as a kit.

RTW
Pre-assembled connector, where only the cables need to be soldered. The plate assembly has already been done. Delivered as 2xM and 2xF.

Delivery Content:

Ready-to-Run / RTR:
Fully wired connector with 3m straight-through cable for a primary servo connection (main functions like ailerons, flaps, etc.). 1 pair (1xM / 1xF).

Ready-to-Wire / RTWR:
Pre-assembled connector with free soldering points for custom realization of a servo connection (main functions like ailerons, flaps, etc.). 2 pairs (2xM / 2xF).

DIY Kit:
Kit for a connector with 3 redundant contacts for a primary servo connection (main functions like ailerons, flaps, etc.). For experienced modelers, includes all parts and screws for assembly, 2 pairs (2xM / 2xF).

14.08 € 14.08 EUR 14.08 €

21.58 €

Not Available For Sale

  • Version

This combination does not exist.

stecker uniconnect lite
Contact Us

Short URL

Assembly Instruction:

Sockets must be securely embedded, e.g., in silicone, to provide slight elasticity for optimal operation.

Warning Notice:

Always use only primary contacts for main functions!