19mm Gear Spotlight, 6Wx2, SHORT

Product No.:: SPOT19X-060x2
Shipping time:: ca. 1-2 days (abroad may vary)
Stock:: Pcs
Weight:: 0.1 kg per Pcs

Color:

24,90 EUR

incl. 20% tax excl. Shipping costs

Pcs:

Add to wish list

Description

Innovative ultrapower headlight with integrated optics and approx. 450 lumens output, absolute novelty in terms of brightness thanks to high-performance COB chip technology in an extremely compact design. CNC-manufactured aluminum reflector with 19mm diameter, optimized for performance and weight for use as a landing gear headlight with direct mounting from the undercarriage leg for heat dissipation. Without sufficient air for cooling, the headlight may only be used for approx. 1 minute, so it should be mounted directly on metal (chassis leg).

These headlights already have optics installed. That is why they are available as standard with a beam angle of approx. 90 ° or in the directional version with 45 °

Direct operation with 2S (8V) Lipo, with 3S (12V) the enclosed additional resistor must be soldered in. Make sure that there is sufficient cooling air during operation; if necessary, check the working temperature to below 65-70 ° C.

Technical Data

Performance: 6Wx2 reference power
Overtemperature protection: switch-off and clocking of the light at 65-70°
Voltage: 2S/8V (3S/12V), use enclosed resistor additionally for 12V!
Electricity: 0.5A
Beam angle: ~45° or 90°
Light intensity: ~450 Lumen WHITE
Light intensity: ~450 Lumen WARMWHITE
Dimension: D19x10mm
Weight: 9g (without cable)

Delivery

Ready to use with 1m connection cable for 3S operation

Information

With the X2 technique high power LEDs are operated in a "cluster". These achieve double the light output for the same heat or the same light output at half heat dissipation. Yet our X2 lights are still fully compatible with all our other lamps. If X2 lights, such as spotlights, are supplied with separate cables, these cables must be used in the delivered wiring! X2 lights are reacting more strongly on a weakening battery.

The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.

Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.

Note: The LED lights are extremely bright! Never look directly into a LED!

Download

TECHNICAL INFORMATION
CONNECTION