- You do not have any products in your shopping cart yet.
Main page » Lights » PROFILED Lights » Lights 9mm series » 9mm DUAL Navigation Light + Strobe, 11Wx2, T-Fuse
9mm DUAL Navigation Light + Strobe, 11Wx2, T-Fuse
The power model of the new generation of compact 9mm position lights with integrated flash and temperature fuse!
The new, forward-angled structure enables the best radiation of the position light to the front and the flash light to the side. Best visibility and low glare like the originals.
The small design can also be easily integrated into large-scale models.
The scope of delivery includes a highly transparent and extremely break-proof cover cap made of injection-molded polycarbonate. The cap must be glued to the light module on the model.
Electricity: 4Wx2 RED/GREEN and 7Wx2 WHITE reference power, 8(12)V
Electricity: 0.4A RED/GREEN, 0,6A WHITE
Beam angle: 0 to 120° RED/GREEN, 60° to 180° WHITE
Light intensity: ~100 Lumen RED
Light intensity: ~150 Lumen GREEN
Light intensity: ~400 Lumen WHITE
Dimension: 9.5x30x50mm
Weight: 9g (without cable)
Electricity: 0.4A RED/GREEN, 0,6A WHITE
Beam angle: 0 to 120° RED/GREEN, 60° to 180° WHITE
Light intensity: ~100 Lumen RED
Light intensity: ~150 Lumen GREEN
Light intensity: ~400 Lumen WHITE
Dimension: 9.5x30x50mm
Weight: 9g (without cable)
With 1m silicone connection cable, already mounted with high quality polycarbonat cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
TECHNICAL INFORMATION
CONNECTION
CONNECTION
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
