- You do not have any products in your shopping cart yet.
![8mm MINI Strobe Light, 20Wx2 8mm MINI Strobe Light, 20Wx2](images/product_images/popup_images/MINI-0_1_1441_0.jpg)
8mm MINI Strobe Light, 20Wx2
Miniature high-performance light with 20Wx2 Ultra-Power. Extreme performance with new chip generation as flashlight on tail fins or thin wings. The mini luminaire is delivered as a ready assembled unit on a CNC manufactured aluminium heatsink and an enclosed polycarbonate cap as covering. The cap is especially designed to scatter light for better visibility. It has to be glued on during installation. Please note that these Ultra-Power lights do not include a temperature protection.
Operation with a maximum of 5-10% Duty Cycle.
Operation with a maximum of 5-10% Duty Cycle.
Electricity: 20Wx2 reference power, 8(12)V, 1.8A
Beam angle: >160°
Light intensity: ~1200 Lumen WHITE
Dimension cap: 8x18x9
Dimension cooling pin: D7x29
Weight: 4g (without cable)
Operation with a maxiumum of 5-10% Duty Cylce
Beam angle: >160°
Light intensity: ~1200 Lumen WHITE
Dimension cap: 8x18x9
Dimension cooling pin: D7x29
Weight: 4g (without cable)
Operation with a maxiumum of 5-10% Duty Cylce
Ready to use with 1m silicon cable and ready made series resistor for 2S, resistor for 3S enclosed
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
TECHNICAL INFORMATION
CONNECTION
CONNECTION
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login