- You do not have any products in your shopping cart yet.
Ultra-Strobelight, SINGLE, ROUND
Extremely powerful strobe light with 9th generation LED chips!
The lights are delivered on a high-performance aluminum carrier with a silicone connection cable and can be used and installed directly. The BAR and ROUND flash lights can produce up to 5000 lumens of light output and are so compact that they can only be used as flash lights. Pay attention to short flash patterns with only up to approx. 5% duty cycle, which corresponds to a single flash or a maximum of a double flash. When commissioning, always check the heat generated on the carrier and matching resistance.
Please note that 8V lights can only be operated with 2S and 12V lights can only be operated with 3S LiPo/LiIon. Dismantling is not possible with these services.
The lights are delivered on a high-performance aluminum carrier with a silicone connection cable and can be used and installed directly. The BAR and ROUND flash lights can produce up to 5000 lumens of light output and are so compact that they can only be used as flash lights. Pay attention to short flash patterns with only up to approx. 5% duty cycle, which corresponds to a single flash or a maximum of a double flash. When commissioning, always check the heat generated on the carrier and matching resistance.
Please note that 8V lights can only be operated with 2S and 12V lights can only be operated with 3S LiPo/LiIon. Dismantling is not possible with these services.
Electric: 8V/2S only, 3A
Beam angle: ~ 120 °
Light intensity: ~ 2000 lumens WHITE
Dimension: 17x8x4 mm
Weight: 2 g (without cable)
Chip: 20W Type
Delivery: with 1m silicone connection cable, ready for connection to 8V / 2S Lipo
Beam angle: ~ 120 °
Light intensity: ~ 2000 lumens WHITE
Dimension: 17x8x4 mm
Weight: 2 g (without cable)
Chip: 20W Type
Delivery: with 1m silicone connection cable, ready for connection to 8V / 2S Lipo
With 1m silicone connection cable, ready for connection to 8V / 2S Lipo
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 12V/3S Lipo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
TECHNICAL INFORMATION
CONNECTION
CONNECTION
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
